Ключевые слова: HTS, EuBCO, coils, design parameters, insulationless, quench, design parameters, temperature distribution, thermal conductivity, voltage, current, time evolution, modeling, numerical analysis
Ключевые слова: HTS, REBCO, coils racetrack, insulationless, magnets, design parameters, thermal properties, overcurrent, cryogenic systems, cooling technology, modeling, numerical analysis
Ключевые слова: Maglev system, evacuated tube, HTS, REBCO, tapes, coils pancake, magnets, design parameters, cryogenic systems, ac losses, modeling, numerical analysis
Ключевые слова: HTS, REBCO, tapes, coils pancake, insulationless, critical current density, distribution, quench properties, modeling, numerical analysis
Ключевые слова: HTS, REBCO, magnets, design parameters, insulationless, transient performance, ac losses, contact characteristics, resistance, neural networks, critical current, numerical analysis, ramp rates, modeling, critical current, angular dependence, magnetic field dependence, current distribution, heat losses
Ключевые слова: NMR magnet, pulsed operation, status, review, resonance effects
Ключевые слова: electromotive force, bulk, plates, pinning, stress effects, mechanical properties, flux density, distribution, magnetization, numerical analysis
Ключевые слова: MRI magnets, hybrid systems, design, LTS, coils outer, HTS, coils insert, design parameters, modeling, numerical analysis
Ключевые слова: wireless, power transfer, capacitor, HTS, Bi2223/Ag, tapes, coils, efficiency, frequency dependence, experimental results
Ключевые слова: HTS, Bi2223, tapes, coils, wireless, power transfer, Cu-based conductors, ac losses, loads, efficiency, resistance, experimental results, numerical analysis, comparison
Ключевые слова: HTS, YBCO, coated conductors, fabrication, MOCVD process, precursors, heat treatment, deposition setup, microstructure, X-ray diffraction, texture
Ключевые слова: power equipment, FCL inductive, design, short circuit test, HTS, coated conductors, YBCO, coils solenoidal, design parameters, impedance, magnetic field distribution, resistance, voltage waveforms, current waveforms, fabrication, critical caracteristics, current-voltage characteristics, test results, FCL flux-coupling
Ключевые слова: bearing magnetic, design, levitation performance, modeling, numerical analysis, stators, magnets permanent
Ключевые слова: HTS, YBCO, coated conductors, overcurrent, pulsed operation, recovery characteristics, experimental results
Ключевые слова: HTS, YBCO, coated conductors, coils pancake, ac losses, stacked blocks, modeling, numerical analysis
Ключевые слова: HTS, YGdBCO, multilayered structures, MOCVD process, coated conductors, heat treatment, fabrication, substrate Hastelloy, buffer layers, critical caracteristics, critical current, thickness dependence, microstructure, X-ray diffraction, current-voltage characteristics, critical current density, experimental results
Ключевые слова: bulk, cylinders, mechanical properties, crack formation, fracture behavior, numerical analysis, stress effects
Ключевые слова: HTS, power transfer, wireless, coils, efficiency, frequency dependence, Bi2223/Ag, tapes, numerical analysis, experimental results, ac losses, comparison
Ключевые слова: HTS, Bi2223/Ag alloy, tapes, fabrication, oxygenation treatments, sintering, microstructure, grain size
Ключевые слова: ITER, coils toroidal, jacket, mechanical properties, tensile tests, temperature dependence, test results
Ключевые слова: HTS, coils pancake, power transfer, modeling, tapes, Bi2223/Ag, numerical analysis, experimental results
Ключевые слова: HTS, Bi2223/Ag, fabrication, tapes, heat treatment, phase formation, microstructure, texture
Ключевые слова: HTS, thin films, mechanical properties, fracture behavior, numerical analysis, modeling, transport currents, current distribution
Ключевые слова: bulk, composites, cylinders, mechanical properties, transport currents, numerical analysis, modeling, magnetostriction
Ключевые слова: HTS, Bi2223/Ag, tapes, PIT process, mechanical treatment, fabrication, critical current density, critical caracteristics
Ключевые слова: HTS, other HTS, high pressure processing, resistive transition, fabrication
Ключевые слова: HTS, coated conductors, substrate Ni, buffer layers, fabrication, microstructure
Ключевые слова: HTS, YBCO, coated conductors, seed layers, substrate Ni, chemical solution deposition, precursors, fabrication, microstructure
Godfrey A., Liu Q., Liu W.(liuw@mail.tsinghua.edu.cn), Lin D.
Ключевые слова: HTS, Bi2223, tapes, microstructure, texture, measurement technique
Han Z., Liu Q., Song X.H., Liu L., Liu L., Zhang J.S., Yi H.P.(yhp01@mails.tsinghua.edu.cn), Kang W., Zheng K.
Ключевые слова: HTS, Bi2223/Ag, tapes, microstructure, mechanical treatment, fabrication, critical current density, critical caracteristics
Ключевые слова: HTS, Bi2223/Ag, tapes monofilamentary, texture, deformation, fabrication
Han Z., Liu Q., Andersen N.H., Chen X.P., Qu T.M., Li M.Y., Grivel J.-C.(jean-claude.grivel@risoe.dk)
Ключевые слова: HTS, Bi2223/Ag, tapes monofilamentary, phase formation, fabrication, microstructure
Fang J., Han Z., Liu Q., Song X.H., Liu L., Zhang J.S., Zheng Y.K., Yi H.P.(yhp01@mails.tsinghua.edu.cn), Kang W., Liu R.
Ключевые слова: HTS, coated conductors, substrate Ni, buffer layers, chemical solution deposition, microstructure, texture, fabrication
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni, substrate single crystal, buffer layers, spin coating process, precursors, heat treatment, texture, fabrication
Ключевые слова: HTS, Bi2223, tapes, cables, design, fabrication, cryogenic systems, power equipment
Ключевые слова: HTS, Bi2223, precursors, phase formation, bulk, microstructure, fabrication
Han Z., Liu Q., Andersen N.H., Chen X.P.(xpchen@tsinghua.edu.cn), Grivel J.-C., Li M.Y.
Ключевые слова: HTS, Bi2223/Ag, tapes, phase formation, critical current density, heat treatment, microstructure, fabrication, critical caracteristics
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni, RABITS process, microstructure, fabrication
Ключевые слова: HTS, Bi2223, precursors, phase formation, oxygenation treatments, microstructure
Han Z., Liu Q., Homeyer J., Andersen N.H., Chen X.P.(xpchen@tsinghua.edu.cn), Grivel J.-C., Li M.Y.
Ключевые слова: HTS, Bi2223/Ag, tapes, precursors, phase formation, heat treatment, Jc/B curves, anisotropy, microstructure, fabrication, experimental results, critical caracteristics
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni, buffer layers, chemical solution deposition, fabrication, microstructure
Fang J., Han Z., Liu Q., Liu L., Li M.Y., Yi H.P.(yi.hanping@innost.com), Zhang J.S., LIU T., Zheng Y.K.
Ключевые слова: HTS, Bi2223/Ag, tapes, PIT process, fabrication, precursors, mechanical treatment, heat treatment, critical current, thermal conductivity, review, critical caracteristics, status
Ключевые слова: HTS, YBCO, coated conductors, fabrication, ion irradiation, microstructure, critical current density, critical caracteristics
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.